ZoneOffRoad 2013-2018 Dodge Ram 1500 4WD 6" Suspension System With Free Shock Boot Covers D40N/ZONU3100X4 | Auto Parts Toys

Note: FREE SHOCK BOOT COVERS

Features:

  • Black Shock Boot Covers, To Protect Shock From Dust and Debris Included Free Of Charge With This Purchase.
  • Front top strut spacer and preload spacer
  • Maintains handling and ride charateristics and works with factory stability control
  • 3" or 5" rear lift option
  • Differential skid plate included
  • CNC machined steering knuckles

Notes:

  • Not recommended for AWD models.
  • Will not fit adjustable air suspension equipped models
  • These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory ride heights first and order the appropriate rear lift height.
  • TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for about 5" of lift or replace the TRX struts with standard struts for use with this system.

Quick Specs

  • Front Lift Height: 6″
  • Front Lift Method: Upper Strut Mounts
  • Rear Lift Height: 3″ / 5″
  • Rear Lift Method: Coil Springs
  • Install Time Hrs: 8-10
  • Difficulty Level 1-5: 3
  • Wheel Size: 17 x 9
  • Back Spacing: 4.5″
  • Max Tire Size: 37x12.50
  • Wheel Size: 18x9
  • Back Spacing: 5″
  • Max Tire Size: 37x12.50
  • Wheel Size: 20x9
  • Back Spacing: 5″
  • Max Tire Size: 37x12.50

This new Zone Offroad 6" suspension system for the 09-13 Dodge Ram 2500 & 09-12 Dodge Ram 3500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is 10 also for trucks featuring a stock 2-piece rear driveshaft.

Brand: ZoneOffRoad

  • 2013-2018 Dodge Ram 3500
Video

 

img

Added to cart successfully!