Note: FREE SHOCK BOOT COVERS
Featured Technology & Benefits:
- CNC Machined Steering Knuckles
- Differential Skid Plate
- Massive Front & Rear Crossmembers
- Custom Valved Shock Absorbers
Notes:
- May require front exhaust modification to clear the front driveshaft, typically on standard cab models.
- Depending on cab configuration, these vehicles vary from 1in to 4in tail high from the factory.
- This system is 5in front 3in rear so you may need to adjust to acquire your desired stance.
- Torsion bar load/unload tool required for installation.
- This kit is not recommended for all wheel drive models.
Quick Specs
- Front Lift Height: 5 Inch
- Front Lift Method: IFS System
- Rear Lift Height: 3 Inch
- Rear Lift Method: Block & U-Bolt Kit
- Install Time Hrs: 6-8
- Difficulty Level 1-5: 3
- Wheel Size: 17 x 9
- Back Spacing: 4.5 Inch
- Max Tire Size: 35 x 12.50
- Wheel Size: 18 x 9
- Back Spacing: 4.5 Inch
- Max Tire Size: 35 x 12.50
- Wheel Size: 20 x 9
- Back Spacing: 5 Inch
- Max Tire Size: 35 x 12.50
This Zone Offroad 4-link system replaces the weak upper and lower factory control arms with greasable DOM tubular arms. the arms mount in the factory control arm pockets for a completely bolt on easy installation that aligns to factory specs. Zone Offroad has engineered their coil springs for a comfortable ride on both gas and diesel trucks. To correct the steering geometry and keep your axle centered, the kit includes a dropped pitman arm and 1/4in thick fabricated track bar bracket that you will not be disappointed with! The kit also includes sway bar drop brackets and if you get serious, taller bump stops. The rear is lifted with 3in blocks to give your truck a more level stance and make for a quick installation.
- UPC: 655623719374
- Brand: Zone OffRoad
- 2002-2005 Dodge Ram 1500
- Some one
- New York