Features:
- Adjust the Voltage Ramp In / Out time correct & eliminate fuel pressure spikes
- Single Or Dual Input/ Output Versions
- 4 models available for complete coverage
- LED to visually monitor the status Of your powerMAX Boost-A device
- New Enables 0-5V or Optional Internal Boost
- Works on all vehicles
- Domestics & Imports
- Compatible with all 12V or 16V battery systems
- Plug & Play Versions
- Simple installation
Since 2010, PowerMAX has set the standard for Boost-A devices. PowerMAX combines the best of two worlds into one product Clean continuous voltage & the highest available amperage. PowerMAX Version 2 offers single or dual outputs along with multiple new features.
SIMPLE INSTALLATION:
- Choose the Plug & Play version or splice into your existing fuel pump, ignition system, intercooler pump or cooling fan via included installation kit.
CASE / ENCLOSURE:
- Industrial Black Heatsink With four mounting tabs.
DIMENSIONS:
- LENGTH: 47/8"
- WIDTH: 3 7/8'
- HEIGHT: 27/16"
Overview:
- High performance Digital Voltage Booster-Regulator
- Available with either Single or Dual Inputs & Outputs
- Trigger boosted output voltage via Ground Or 0-5V sensor
- Optional Trigger via adjustable Internal Boost Sensor
Output:
Continuous Output Rating: 31 AMPS @
peak Output Rating: 38 @ (60 seconds)
Input:
Input voltage: 9.5V -19V DC
Input Fuse: 80 AMPS (dual) or 40 AMPS (single)
Maximum Voltage output For each Model:
FuelMAX: 22V or 18V (dual range adjustable Output)
SparkMAX: 25V (adjustable output)
SparkMAX Race: 31 V (adjustable output)
InterC001MAX: 16V (continuous output)
FanMAX: 15V (continuous output)
COMPATIBILITY:
- Compatible with all 12V or 16V battery
- systems (9.5Vto 19V)
LOWEST VOLTAGE DROP:
When PowerMax is not boosting output voltage the voltage drop across the unit is only: 0.05V
USER ADJUSTABLE OUTPUT VOLTAGE:
- Adjust the output voltage via the knobs on the front panel,
- Use the dip switches to save the voltage setting.
- Optional remote mounted voltage control knob overrides
- saved voltage setting and can be adjusted from the drivers seat.
- Adjustment range: 14.5V
- 100% = 18V, 22V, 25V or 31V (output model specific)
Status LED:
- Anytime the unit has power, the green LED will glow continuously.
- When boosting the output voltage, the green LED will flash slowly.
- While the output voltage is being adjusted via the front panel the green LED will flash quickly.
- After the front panel voltage values have been saved, the green LED will twinkle.
Adjustable Voltage Ramp-In / Ramp Out Model Specific:
- Three different ways to Ramp-in and Ramp-out boosted voltage.
- Ramp-in the boosted voltage over time (Ground, or 0-5V trigger).
- Externally adjustable via dip switch settings.
- Time Settings: O, 0.25, 0.50 and 0.75 seconds
- Ramp in the boosted voltage based on the 0-5VVoltage Trigger,
- Externally adjustable via dip switch settings.
- Range Settings: 0V, 0.5V, 1.0V and 1.5V
- Use the optional internal boost sensor to ramp in the boosted
- voltage based on manifold boost pressure (psi).
- Externally adjustable via dip switch settings.
- Range Settings: OV, 4psi, 8psi and 12psi
Installation Kit Included:
- Enable Wire harness, adapter fitting (1/8th NPT to barb)
- Hobbs switch preset @ 5psi (user adjustable 3-7psi), solder
- heat shrink ring terminals, heat shrink wire splices, tie straps
- self-tapping screws, vacuum line, 1/4" to 3/1 6" vacuum tee
- 3/16" vacuum tee, 3/16 to 3/8" vacuum tee and 30 amp mini-fuse.
Note: The installation kit is specific to each PowerMAX model
Brand: JMS
UPC: 021201230263
- 2015-2021 Ford Mustang
- Some one
- New York