Note: Will Only Fit 4in Axle

Features:

  • 100% bolt-on design for easy installation.
  • High-strength control arm relocation brackets correct suspension geometry and add rigidity.

Quick Specs:

  • Front Lift Height 6in
  • Rear Lift Height 4in
  • Front Lift Method Coil Springs
  • Rear Lift Method Cast Blocks
  • Lift Type Lift Kit
  • Wheel Size 17 x 9
  • Back Spacing 5in
  • Max Tire Size 37 x 12.5
  • Wheel Size 2 18 x 9
  • Back Spacing 2 5in
  • Max Tire Size 2 37 x 12.5
  • Wheel Size 3 20 x 9
  • Back Spacing 3 5in
  • Max Tire Size 3 37 x 12.5
  • Finish Powdercoat
  • Metal Cutting Required No
  • Accommodates Factory Wheels See Notes
  • Welding Required No

Include:

  • All Necessary Mounting / Installation Hardware
  • Brake Line Brackets
  • Coil Springs
  • Control Arm Relocation Brackets
  • Dropped Pitman Arm
  • Rear Lift Block & U-Bolt Kit
  • Track Bar Relocation Bracket

Important Notes:

  • Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2€� taller ride height, so net lift gain will be 4€� over stock.
  • Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
  • Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
  • Fitment This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
  • Two-piece rear drive shaftcarrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
  • Wheels / Tires: Adding larger-than-stock wheelsont bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper€™s stock location.
  • Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks.

Built to provide a full 6in of lift for clearance of  up to 37in tires, this lift kit corrects suspension and steering geometry so your truck drives and handles great with more capability offroad. Get the look and performance you want out of your 4WD 2009 - 2012 Dodge / Ram 2500 Truck.

Brand: Zone OffRoad

  • 2009-2012 Dodge Ram 2500
Video

 

img

Added to cart successfully!