Readylift 2024-2025 Toyota Tacoma 3" SST3.3 Suspension System With Falcon 3.3 Struts Shocks 62-54360

Note: Not compatible with 2024 Tacoma models equipped with rear leaf springs. Fitment not confirmed on trucks with the optional sway bar disconnect. Not compatible with Adaptive Variable Suspension (AVS) vehicles.  If installed on an AVS vehicle, a dash light will illuminate.

Features:

• 3" front / 1" rear lift height to clear larger wheels and tires while retaining OEM ride comfort and control.
• All-new Falcon 3.3 Fast Adjust Dampers with dual external adjustment knobs:
• 3-position main compression knob (Soft, Custom, Firm).
• 8-position Micro Adjust dial for fine-tuning across terrain types.
• Performance-engineered monotube dampers with reservoir design, high-temp Red Line oil, and VOD (Volume Optimized Damping) for ultimate consistency and control.
• Hard-anodized 6061-T6 Aluminum bodies for superior impact resistance and thermal management.
• Tubular steel UCAs with proprietary high-angle ball joints designed for lifted applications.
• Tire Fitment: Up to 285/75R17 on 8” wide +35 offset (no trimming).
• Up to 295/55R20 on 8.5” +35 offset.
• 315/70R17 or 35x12.50R17 with minor trimming.
• The new full-use skid plate integrates seamlessly with factory components.
• Bolt-on installation – no cutting or permanent modifications required.

Kit Components:

• 24+ Tacoma Rr Swaybar Bracket
• 24+ Taco, Fnt, Sway Bar Extn
• 24+ Taco Rr Sprg
• 24+ Taco Skd Plt
• 24+ Tacoma Diff Rear Spacer
• 24+ Tacoma Diff Front Spacer
• 24+ Tacoma 3/8" Laser Cut Washer
• 24+ Tacoma Rear Brake Line Bracket
• 24+ Tacoma Ddc 1/8" Laser Cut Washer
• 24+ Tacoma Frt Diff Drop, Ctr Sleeve
• 24+ Tacoma Frt Diff Drop, Ctr Bush
• 24+ Tacoma Frt Diff Drop, Center
• 24+ Tacoma Frt Diff Drop, Rh
• 24+ Tacoma Frt Diff Drop, Lh
• 24+ Tacoma Bump Stop Cup, Rear, Snap-in
• 24+ Tacoma, Bump Stop Pad, Left
• 24+ Tacoma, Bump Stop Pad, Right
• 24+ Tacoma, Bump Pad, Spacer
• 24+ Tacoma Frt Uca Assy, Lh
• 24+ Tacoma Frt Uca Assy, Rh
• 24+ Tacoma Frt Lt Co, Srs 3 Typ 3
• 24+ Tacoma Frt Rt Co, Srs 3 Typ 3
• 24+ Tacoma Rr Lt Dmper, Srs 3 Typ 3
• 24+ Tacoma Rr Rt Dmper, Srs 3 Typ 3
• 0.87" Od X 0.56 Id X 2.65"L Crush Sleeve
• 1.52" Od X 0.85"Id Polyurethane Bushing
• Falcon Bump Stop
• Hardened Steel Washer
• Hardware Pack

Tire Fitment:

• Wheel Tire  Note: Stock (17x7 +60)  285/70R17  No Trim (Widest tire you can put on, Knuckle clearance) 
• 17x8 +35  285/70R17  No Trim
• 17x8 +35  285/75R17  No Trim 
• 17x8.5 +47  285/70R17  No Trim
• 17x8.5 +47  285/75R17  No Trim
• 17x8.5 +25  285/70R17  No Trim
• 17x9 +1  285/70R17  May require trimming. (4mm clearance)
• Tire Size Comparison: 18x8 +35  285/65R18  No Trim
• 18x8 +35  285/70R18  No Trim 
• 18x8.5 +47  285/65R18  No Trim
• 18x8.5 +47  285/70R18  No Trim 
• 18x8.5 +25  285/65R18  No Trim
• 18x9 +1 285/65R18  May require trimming. (4mm clearance)
• 20x8.5 +35  295/55R20  No Trim
• 20x9 +18  295/55R20  No Trim
• 20x9 +1   295/55R20  May require trimming. (4mm clearance)
• Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.
• Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.

ReadyLIFT proudly introduces the next evolution in Toyota Tacoma suspension performance: the all-new 3" SST3.3 Lift Kit (PN 62-54360) engineered specifically for the 2024 Tacoma equipped with factory rear coil springs. This innovative suspension solution redefines what’s possible from a bolt-on lift system—delivering superior ride quality, aggressive stance, and off-road capability surpassing our popular 3” Tacoma suspension system.

Designed for drivers demanding more from their suspension, the SST3.3 kit combines a 3” front and 1” rear lift with our brand-new Falcon 3.3 Fast Adjust Monotube Shock System—a purpose-built upgrade offering unmatched comfort, control, and adaptability both on- and off-road. This system also includes heavy-duty DOM tubular steel upper control arms with corrected ball joint angles to maximize durability, alignment geometry, and articulation.

Whether you’re navigating canyon roads, carving trails, or simply upgrading your truck’s street presence, the SST3.3 delivers the perfect blend of rugged capability and premium performance.

The 62-54360 SST3.3 Suspension System is engineered to elevate Tacoma’s capability to an entirely new level—ideal for those who want more than just a lift, but a true performance upgrade.

Brand: Readylift

• 2024-2025 Toyota Tacoma