Notes:

  • Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders – See instructions for proper configuration for your application.
  • Install Time: 1.5 Hours

Fits:

  • JKU Wrangler Unlimited (4-door)
  • 5-6” Lift

Includes:

  • Series 3.3 Fast Adjust Piggyback Shocks - all 4
  • All necessary hardware

Features & Benefits:

Series 3.3 Fast Adjust Piggyback Shocks:

  • Series 3.3 Fast Adjust shocks can be tuned for specific terrain and/or handling characteristics
  • Fast Adjust Knob w/ 3 compression settings for large damping adjustments
  • Micro Position Dial w/ 8 compression settings for finer damping adjustments
  • Ideal for daily driven Jeeps as well as the serious enthusiast wanting to adjust damping for all driving conditions
  • Upgradeable to 3.4 Remote Air Adjust (# 00-10-34-400-160) via a Cartridge Upgrade Kit for quick compression adjustments (sold separately) – contact customer service for details

JK/JKU Falcon Performance Shocks:

  • JK/JKU corner-specific shock absorbers
  • Front upper offset post design provides maximum shock body to frame clearance during articulation
  • Outboard mounting increases clearance for lifted vehicles w/ raised track bar brackets
  • Rear shock body (all) and reservoir (piggyback) positioned on bottom eliminates shaft damage from rocks kicked up by the tires
  • Ideal for daily driven Jeeps as well as the serious enthusiast wanting a consistent firm feel through all driving conditions

Falcon Series 3 Piggyback Shocks:

  • Piggyback design features increased oil and gas capacity vs. monotube or twin-tube designs reducing heat buildup for more consistent performance
  • Piggyback fluid passage design flows 6x more oil than restrictive reservoir hose designs as well as eliminates common leakage issues found in banjo and swivel fittings
  • Front shock features unique piggyback design w/ horizontal reservoir to increase clearance for large tires

Falcon Performance Shocks (All):

  • Vehicle-specific shock absorbers
  • Race-inspired performance for increased vehicle stability
  • Improved dynamic roll control and low-speed damping
  • Dramatic improvement in on-road comfort and off-road performance
  • Optimized fitment for clearance during full suspension travel and articulation
  • 2.25” shock body provides optimal performance
  • 6061-T6 aluminum alloy shock body resists wear and protects internal components while providing superior heat dissipation
  • Smooth honed internal shock body surface for long-term performance
  • 3/4” induction hardened chrome plated shaft resists rock damage and corrosion as well as prevents shaft buckling
  • Maximum shaft diameter allows for more precise tuning
  • Hard anodized billet piston
  • 1-piece Teflon bronze piston wear band w/ O-ring
  • Digressive linear piston and base valve technology
  • Volume Optimized Damping (VOD) for quicker ramp up and increased damping volume
  • Inline OGS (Oil/Gas Separator) prevents cavitation
  • Red Line full synthetic shock oil w/ high viscosity index of 519 for consistent performance across all temperatures and reduced shock fade
  • Synthetic formula also contains special anti-wear and lubricity agents for excellent thermal stability
  • 1,000-hour salt spray corrosion resistance test on all hardware
  • Serviceable and rebuildable (factory serviced)
  • Designed, engineered, and assembled in-house from domestic and globally sourced components
  • Patent pending design
  • 3-year warranty

Description
 

The TeraFlex JK 3 Suspension Lift Kit delivers everything that you need to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back! This kit includes 3 lift coil springs, front adjustable track bar, front sway bar disconnects, rear sway bar links, rear track bar bracket, bump stops and all necessary hardware. This kit will allow you to run up to a 35 tire. Aftermarket wheels with 4.5 backspacing or less are required, or use stock wheels with TeraFlex Offset Wheel Adapters (#1055000 - 2 sets). Fits all JK Wrangler models including Rubicon and Unlimited. This kit does NOT include Shocks

Brand:TeraFlex

 

Document
Video

 

img

Added to cart successfully!