NOTE: The TF44 axle is designed to work with non-Rubicon Dana 44 lockers. Please consult the Tera44 axle flow chart prior to placing your order.

FITS:

  • JK Wrangler (2-door) – front
  • JKU Wrangler Unlimited (4-door) – front

INCLUDES:

  • ARB air locker
  • Spicer ring & pinion – 5.13
  • Spicer bearings & install kits
  • TeraFlex HD ball joints
  • Factory yoke

FEATURES & BENEFITS:

  • 3.25 O.D. x 0.5” wall extreme duty axle tube increases strength to resist bending & torsion
  • Pre-installed inner axle seals
  • Forged HD inner knuckles w/ greater upper & lower section strength
  • Ductile cast iron housing w/ increased rib gussets
  • HD ductile iron differential cover
  • Asymmetric housing design, for extra-long tube side strength
  • Smooth radius bottom design to glide over rocks & obstacles
  • Integrated lower flexarm skid plates
  • Bottom oil drain hole for simple fluid changes
  • Premium UV protected triple-stage powder coat process for superior corrosion resistance
  • 1/4”-thick CNC laser cut axle brackets for extreme strength
  • Integrated factory location upper control arm mount
  • Pre-installed upper control arm bushings
  • Reinforced front track bar mount (ties into spring pad) for greater strength
  • Proper pinion angle for lifted JK applications
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps & lower spring retainers
  • Retains all JK ESP, ABS, & speedometer sensor capability
  • 100% engineered, designed, & built in the USA
  • 100% new components
  • 1-Year / Unlimited Mileage Warranty

REQUIREMENTS & RECOMMENDATIONS:

  • Below is a list of Requirements & Recommendations for TeraFlex axle housings as budget and build preference allows.
  • Questions? Stop scratching your head and contact us! We know our axles AND we’re here to help!

CONTROL ARM UPGRADE

  • 4-6” LIFT: This much lift REQUIRES adjustable flexarms for caster angle adjustments.
  • Front upper (# 1415520) & front lower (# 1415500) TeraFlex JK adjustable Alpine Flexarms will work w/ 2.5-4” lifts.
  • Front upper (# 1315520) & front lower (# 1315500) TeraFlex JK adjustable Alpine Long Flexarms will work w/ 3-6” lifts.

INNER AXLE SHAFT UPGRADE

  • 0-6” LIFT: REQUIRES aftermarket inner axle shafts to handle the additional power. TeraFlex offers 34.19” passenger side axles (# 304136) & 19.11” driver side axles (# 304120). These shafts MUST be used w/ 2013-2017 JK axle U-joint.

AXLE STUB UPGRADE

  • 0-6” LIFT: High-quality aftermarket chromoly stubs are recommended, though the stock 2013-2017 JK outer axle stubs can be (re)used.

AXLE SHAFT TUBE SEAL UPGRADE

  • 0-6” LIFT: Get serious with HD 0.5” wall seals (# 4354050) or keep it real with standard 0.25” wall seals (# 4354025). Stock seals may also be reused.

STEERING SYSTEM UPGRADE

  • 4-6” LIFT: Get the optimal set up w/ the JK Complete High Steer System w/ HD Tie Rod & Drag Link Flip Kit (# 4391000) or save a little w/ the HD Tie Rod & Flipped Drag Link Kit (# 1853905). For tighter budgets, the JK High Steer Knuckle Kit (# 4390879) will provide the necessary steer height w/ your stock steering components. The factory steering system may also be reused.

BRAKE UPGRADE

  • 0-6” LIFT: Experience a notable difference w/ a TeraFlex Big Brake Kit (# 4303400 or # 4303420) or JK Big Rotor Kit (# 4303480 or # 4303490).
  • INSTALL TIME: 6 Hours

Description
 

The TeraFlex TJ/LJ 3 Suspension System w/ 4 Flexarms delivers serious trail performance without breaking the bank!

Brand:TeraFlex

 

Document
Video

 

img

Added to cart successfully!