• Requires aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels.
  • Driveshaft modifications may be necessary with this suspension system. See the TeraFlex Rzeppa High Angle CV Kit (# 1744014).
  • 2007-2011 JK/KU models will require Extended Length Front Brake Lines (# 4353300).
  • Requires cutting.
  • Alignment required.
  • Install Time: 11 Hours


  • JK Wrangler (2-door)


  • Lift Height: 3”
  • Max Tire Diameter: 35”


  • 3” lift coil springs
  • Fully adjustable Alpine flexarms – set of 8
  • HD forged adjustable front track bar
  • SpeedBump bump stops
  • Front brake line anchor kit
  • Front sway bar disconnects
  • Rear track bar bracket
  • Rear sway bar links
  • Exhaust spacers
  • Falcon Series 3.1 Piggyback Shocks – set of 4
  • All necessary hardware
  • And more

Features & Benefits:

  • Dependable performance w/ zero worries
  • Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH)
  • Fully adjustable Alpine flexarms optimize correct caster & pinion angles for 2.5-4” lift kits
  • High-quality, maintenance-free factory-style bushings provide excellent vibration damping & ride quality
  • HD forged adjustable front track bar
  • SpeedBump bump stops provide progressive compression during high-speed suspension movement
  • Full range of movement for off-road flex & articulation
  • Install & drive simple bolt-on installation – no welding required
  • TeraFlex Lifetime Warranty


TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems. The 2.5 Alpine CT2 Short Arm Suspension System was designed for the enthusiast who wants to fine tune their suspension. Alpine Control Arms allow tuning of the caster and pinon angles, centering of the axles in the wheel wells, and wheelbase adjustment. The zero-maintenance adjustable control arms make the Alpine CT2 the perfect all-around suspension system. Adjustable Alpine Control Arms tune caster angle, anti-squat geometry, and tire position. The adjustable Alpine IR Front Track Bar and Front (3.5+) and Rear Track Bar Brackets improve steering response, optimize vehicle roll center, and reduce body roll to for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort! We recommend Falcon SP2 Mode Adjust Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. The Alpine CT2 Suspension System is offered with a choice Falcon SP2 3.3 Fast Adjust Piggyback Shocks, Falcon SP2 3.1 Piggyback Shocks, Falcon SP2 2.1 Monotube Shocks, or without shock absorbers.






Added to cart successfully!